Fusible Resistor
Fusible Resistor
 |
 |
Fusible Resistor 1 4W 5 350ppm 47 Ohms 4R7 x 20PCS |  |
 |
US $1.05 | 4d 5h 32m |
 |
22 OHM 1 WATT FUSIBLE RESISTOR 5 10 PC PACKAGE | |
|
US $4.49 | 11d 14h 17m |
 |
22 OHM 1 2 WATT FUSIBLE RESISTOR 5 10 PC PACKAGE | |
|
US $3.99 | 11d 14h 17m |
 |
33 OHM 1 2 WATT FUSIBLE RESISTOR 5 10 PC PACKAGE | |
|
US $3.99 | 11d 14h 17m |
 |
22 OHM 1 4 WATT FUSIBLE RESISTOR 5 10 PC PACKAGE | |
|
US $3.99 | 11d 14h 17m |
 |
22 OHM 1 2 WATT FUSIBLE RESISTOR 5 10 PC PACKAGE | |
|
US $3.99 | 11d 14h 20m |
 |
Fusible Resistor 1 4W 5 350ppm 220 Ohms 22R0 x 20PCS | |
|
US $1.05 | 18d 23h 50m |
 |
Micron 01 Ohm 1 2W Fusible Resistor Sony 120293361 | |
|
US $5.95 | 19d 10h 42m |
 |
Fusible Resistor 1 4W 5 350ppm 10 Ohms 1R0 x 20PCS | |
|
US $1.05 | 28d 7h 2m |
 |
Fusible Resistor 1 4W 5 350ppm 100 Ohms 10R0 x 20PCS | |
|
US $1.05 | 28d 7h 2m |
 |
Fusible Resistor 1 4W 5 350ppm 22 Ohms 2R2 x 20PCS | |
|
US $1.05 | 28d 7h 2m |
Fixing Hitachi TV convergence problem, which resistor(s) to replace?
http://answers.yahoo.com/question/index;_ylt=Aph8LvI488K.pYcpUni5f6bty6IX?qid=20070220114513AAbIHSm
I originally posted a question on how to fix a Hitachi TV convergence problem. I got to removing and replacing the IC, but now I am unsure which resistors to replace. The kit I purchased came with several "fusible resistors, axial", ranging from 1-3.9 ohms. Which ones do I need to replace and I do I find them?
The kit should have a pictorial of the ICs and the locations of each resistors. Unless yours is bootleg. Watch out there are after market knock offs that dont last very long.
You need an OHM meter, and need to check each one.
Usually the resistors dont need replacing.
But check to see if any look burnt.
Go ahead and put it together and turn it on and see if its still out of wack, if so go to menu and try to adjust the convergence, if most of the colors will move into the crosshair except 1, then a resistor is out in that circuit.
IE, red wont converge but blue will, go to red circuit near convergence amps and check all resistors.
Hope that helps.
Sensitive Fingertips
